DIN.AL Couplings

DIN.AL GEL 500-S Couplings

The fin-couplings DIN.AL., belonging to series “GEL 500-S” are usually used for the connection of tacho-generators, encoders, contactors, motors, measuring instruments and for every application where a constant rotational movement in the four quadrants is required, where an absolute torque rigidity is required and even when the shafts coupling is not perfectly lined up. The particular dynamic construction with clamps in light alloy, allow the blocking of the coupling without using screws or keys.

DIN.AL 500S Couplings Available 

• DINAL Gel 500S 11/11
• DINAL Gel 500S 11/14

DIN.AL GEL 100-S Couplings

The fin-couplings DIN.AL., belonging to series “GEL 100-S” are usually used for the connection of tacho generators, encoders, contactors, motors, measuring instruments and for every application where a constant rotational movement in the four quadrants is required and where an absolute torque rigidity is required, even when the shafts coupling is not perfectly lined up. The particular dynamic construction with clamps in light alloy, allow the blocking of the coupling without using screws or keys.

DIN.AL GEL 5000-C Couplings 

The double hubs, one internal and the other external, make it easy to reach the fastening screws. They are used to connect tacho-generators, encoders, motors, gauges and for any other application where constant rotational movement in the four quadrants is required and where absolute torque rigidity is needed even when shaft coupling is not perfectly lined up.

DIN.AL 5000C Couplings Available

• DINAL Gel 5000-C 11/11
• DINAL Gel 5000-C 11/14

DIN.AL GEL 5000 R-C Couplings

The double hubs, one internal and the other reduced external, make it easy to reach the fastening screws. They are used to connect tacho-generators, encoders, motors, gauges and for any other application where constant rotational movement in the four quadrants is required and where absolute torque rigidity is needed even when shaft coupling is not perfectly lined up.

DIN.AL GEL 3000-C Couplings

The outer double hubs make it possible to connect large shafts and easy to reach the fastening screws. They are used to connect tacho-generators, encoders, motors, gauges and for any other application where constant rotational movement in the four quadrants is required and where absolute torque rigidity is needed even when shaft coupling is not perfectly lined up.

DIN.AL 3000 C Couplings Available 

• DINAL Gel 3000-C 10/10

DIN.AL GEL 3000 R-C Couplings

The DIN.AL fin couplings of the GEL 3000 R series have short outer double hubs which make it possible to connect large shafts, overall dimensions being very small. They are used to connect tacho-generators, encoders, motors, gauges and for any other application where constant rotational movement in the four quadrants is required and where absolute torque rigidity is needed even when shaft coupling is not perfectly lined up.

DIN.AL 3000 R-C Couplings Available

• DINAL Gel 3000 R-C 11/11

DIN.AL GEL 1000-C Couplings

The connection of the two hubs to a central body of a given size ensures the same elasticity, yet very small overall dimensions. They are used to connect tacho-generators, encoders, motors, gauges and for any other application where constant rotational movement in the four quadrants is required and where absolute torque rigidity is needed even when shaft coupling is not perfectly lined up.

DIN.AL GEL 1000 R-C Couplings

The DIN.AL. fin couplings of the GEL 1000 R series have the connection of the two hubs to a central body of a given size which ensures the same elasticity, yet very small overall dimensions. They are used to connect tacho-generators, encoders, motors, gauges and for any other application where constant rotational movement in the four quadrants is required and where absolute torque rigidity is needed even when shaft coupling is not perfectly lined up.

DIN.AL GEL 2000-C Couplings

The direct connection of the two hubs ensures very small overall dimensions. They are used to connect tacho-generators, encoders, motors, gauges and for any other application where constant rotational movement in the four quadrants is required and where absolute torque rigidity is needed even when shaft coupling is not perfectly lined up.

DIN.AL GEL 2000 R-C Couplings

The direct connection of the two hubs ensures very small overall dimensions. They are used to connect tacho-generators, encoders, motors, gauges and for any other application where constant rotational movement in the four quadrants is required and where absolute torque rigidity is needed even when shaft coupling is not perfectly lined up.

DIN.AL GSBG . GSXG Couplings

• Coupling obtained from two anodized aluminium hubs with special steel bellows.
• Unique misalignment correction capacity; high torque rigidity.
• Backlash and vibration free.
• Outstanding servo control.
• Screw fixing system.
• Clamp fixing system.
• Working temperature range: -30 °C to +120 °C.

DIN.AL GSXV Couplings

• Coupling obtained from two anodized aluminium hubs with special steel bellows.
• Unique misalignment correction capacity; high torque rigidity.
• Backlash and vibration free.
• Outstanding servo control.
• Clamp fixing system.
• Working temperature range: -30 °C to +120 °C.

DIN.AL GLPV Couplings

• Electrically insulating.
• Vibration free.
• High speed permissible.
• High torque rigidity.
• Good misalignment correction.
• Working temperature range: -10 °C to +80 °C.

DIN.AL GMPG . GMOG Couplings

• Highly cost-effective coupling built using die-casting technique.
• Metal parts fitted into hubs allow for optimal shaft connection.
• Thermally and electrically insulating.
• Working temperature range: -10 °C to +80 °C.